Bucket grid guard
Herman Robert
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-08-08 18:37:46
0
0
000描述
模型来源
评论(0)
This is a 244mm diameter grid guard to avoid picking up grit on your sponge whilst washing your car.
This was printed in PLA which apparently floats, so I've included two 8.2mm holes to allow an 8mm bolt and nuts to give it some weight.
It was designed in Onshape CAD software.
This was printed in PLA with bed supports for the middle piece with 30% infill.
模型来源
原设计地址: 点击查看
CC BY