BMC spacer
Gordon Hart
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2026-05-20 16:50:16
0
0
000描述
标签
模型来源
评论(0)
Device Type Device Type K1C Material Material ASA Quality Layer Height 0.20mm Line Width 0.42mm Shell Hide Z Seam Yes Wall Thickness 2.10mm Top/Bottom Thickness 1.20mm Infill Infill Pattern Lines Infill Density 60.00% Speed Print Speed 45.0mm/s Initial Layer Speed 22.5mm/s Travel Speed 120.0mm/s Temperature Nozzle TEMP 260.00°C Hotbed TEMP 105.00°C Travel Enable Retraction Yes Retraction Distance 0.80mm Retraction Speed 30.00mm/s Support Generate Support Yes Support Placement Everywhere Support Pattern Zig zag Infill Density 15.00% Support Overhang Angle 50.0° Build Plate Adhesion Build Plate Adhesion Brim Vase Mode Vase Mode No Ironing Ironing No Fold
标签
模型来源
原设计地址: 点击查看
CC BY