Print with a layer height of 0.08 mm and a first layer thickness of 0.16 mm, using 100% infill.

Materials Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Gray Transmission Distance: 2
PLA+ Sunlu Skin Tone Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

Color change indicator:
Start with black.
Change to gray at layer 7 (0.64mm).
Change to skin tone at layer 12 (1.04mm).
Change to white on layer 17 (1.44mm) and continue until the end.

This is a 3D photo 😋

https://makerworld.com/en/models/199664#profileId-220202