I wanted a stand for a TP-Link Tapo C100 camera to use with the BambuLabs A1. I initially used the standard adapter connected to the A1’s screen, and although it worked well, I was looking for an alternative that wouldn’t add weight to the screen. In the process, I discovered this simple stand (original source:https://makerworld.com/en/models/856556)), and extended the neck to make the camera height roughly the same as that of the adapter used with the A1 screen. I also reduced the head portion (spherical joint) of the adapter by about 99% in the XY direction to ensure a tighter grip on the camera. It was printed using Atomic PLA, although PETG might be more suitable for this type of joint.