Very effective hueforge print - it uses Darkest Dunegon 2 inspired illustration style which translates well into HueForge prints. 

 

The Model is 225x225mm in size

You may print at higher layer heights below the Base Thickness of 1.12mm

The Max allowed Thickness is 7.2mm and the Actual Thickness is 2mm

 

Filaments Used:

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6

#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8

#c00d1e PLA BambuLab Basic Red Transmission Distance: 4

#ffff00 PLA Sunlu Basic Yellow Transmission Distance: 4.6

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

 

Swap Instructions:

Start with Black

At layer #14 (1.2mm) swap to Beige

At layer #15 (1.28mm) swap to Red

At layer #20 (1.68mm) swap to Beige

At layer #21 (1.76mm) swap to Basic Yellow

At layer #22 (1.84mm) swap to Jade White for the rest.