Rounded Magnetic Earplug Holder
Pearl Cameron
AI找相似
打印配置(0)
模型文件(0)
0
0
0
发布时间:2025-08-23 07:41:09
0
0
000描述
标签
模型来源
评论(0)
Small rounded earplug holder with magnetic snap.
The other holders I could find didn't really appeal to me, so I designed my own.
Model is about 40mm x 40mm x 25mm after assembly, with an internal space of 32mm x 25mm x 25mm.
Magnets used come from a Vaperesso pod and measures 2.5mm x 2mm x 7mm. You'll need 4.
Fastener used is a M3x25 button head cap screw with a M3 nut. Use locktite on the nut otherwise the hinge action will work it loose. Alternatively use a nyloc nut, just remember to adjust the screw length accordingly.
File are for one piece, so print two.
The other holders I could find didn't really appeal to me, so I designed my own.
Model is about 40mm x 40mm x 25mm after assembly, with an internal space of 32mm x 25mm x 25mm.
Magnets used come from a Vaperesso pod and measures 2.5mm x 2mm x 7mm. You'll need 4.
Fastener used is a M3x25 button head cap screw with a M3 nut. Use locktite on the nut otherwise the hinge action will work it loose. Alternatively use a nyloc nut, just remember to adjust the screw length accordingly.
File are for one piece, so print two.
标签
模型来源
原设计地址: 点击查看
CC BY