The arms of the servos I wanted to use would collide with the longest lug at the top of the mount so I needed to modify the design a little. I also wanted to mount the servo on the cover rather than the base as this would make it easier to remove the servo should it ever be necessary. I decided to make it so that the servo wire could exit left or right too.
This is real remix! Using Windows 3D builder I sliced off parts I didn't want and reused parts I did want. Both parts are included in a single .stl file.
Printed with ABS on a fully enclosed Elegoo Centuari Carbon. Brim used, nozzle temp 230c, bed 100c.