This is a base used to support a flowerpot with a diameter of 25 centimeters. I couldn't find a base that I liked and was tall enough.

I built this beautiful flowerpot using a hemp rope basket

https://www.amazon.es/gp/product/B089G6ZNYC/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1

You need three support brackets to form a triangle and three anchoring brackets. You also need screws and nuts. Each leg requires four screws, for a total of twelve. I used screws with a diameter of 4 mm, but you can also use 5 mm ones.

It's the support base for a planter with a base of 25 cm. I couldn't find any that I liked and were tall enough.

With a jute basket (string) and some legs bought on Amazon (from 8 to 42 cm high), I built this beautiful planter.

https://www.amazon.es/gp/product/B089G6ZNYC/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1

You will need 3 support pieces that form a triangle and 3 anchor pieces. You will also need bolts and nuts. Each leg needs 4, for a total of 12. I used 4mm diameter screws, but 5mm can also be used.

Print settings

Printing brand:

Anycubic

Printers:

Raft layer:

No

Support:

Resolution:

0.15

Fill in:

Consumables: It doesn't matter, PLA 850Wood

Category: Decorations