Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Model is 180x243 mm in size (188x250 mm with frame)

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 4mm and the Actual Thickness is 2.96mm

BURAN_01

#000000 PLA+ Elegoo Black Transmission Distance: 0.1

#abb4ba PLA+ Elegoo Gray Transmission Distance: 4.6

#e4e8e7 PLA+ Elegoo White Transmission Distance: 5.5

#000000 PLA+ Elegoo Black Transmission Distance: 0.1

#a62f36 PLA+ Elegoo Red Transmission Distance: 4.3

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Gray

At layer #18 (1.52mm) swap to White

At layer #24 (2mm) swap to Black

At layer #26 (2.16mm) swap to Red for the rest.

BURAN_02

#000000 PLA+ Elegoo Black Transmission Distance: 0.1

#abb4ba PLA+ Elegoo Gray Transmission Distance: 4.6

#e4e8e7 PLA+ Elegoo White Transmission Distance: 5.5

#a62f36 PLA+ Elegoo Red Transmission Distance: 4.3

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #12 (1.04mm) swap to Gray

At layer #15 (1.28mm) swap to White

At layer #24 (2mm) swap to Black

At layer #25 (2.08mm) swap to Red for the rest