I slightly improved, or rather came up with a new solution for the stand of the Wi-Fi and Bluetooth antenna provided with ASUS motherboards. Using magnets, it can be easily placed wherever it suits you best. 📡

The original antenna is locked into the holder with a self-locking mechanism, you might need to slightly adjust the model according to your printer. The source data is, of course, available. 

Print instructions:

• Material: PLA, PETG
• Layer: 0,2 mm
• Perimeters: 2
• Infill: 15%
• Supports: Recommended
• Brim: No

This model does not require any special settings, more details in the attached 3MF file.

Part list:

• Printed part [x1]
• Neodymium magnets ∅7x2 mm [x4]

Assembly instructions:

If you decide to use magnets, first thoroughly clean the contact surfaces of the magnets and the printed part. Then apply glue and attach the magnets. The precise gluing procedure depends on the chosen adhesive; I used my favorite two-component epoxy glue.

Custom modification:

If you want to modify the model, I am attaching the STEP file and a link to my OnShape.

OnShape Link

Current model version: 

V01

Note:

Please don’t forget to leave a comment and rating. I truly appreciate any feedback – it helps me improve and address any potential shortcomings in the model. Thank you very much!

Print visions, create reality!