I have included a 3mf file that is multi-color ready! Otherwise, just load the stl with the settings below in your favorite slicer and get to printing.

Print Settings

• Layer height: 0.2mm
• Wall generator: Classic
• Detect thin walls: Enabled
• Wall loops: 3
• Top/Bottom shell layers: 2
• Top/Bottom shell thickness: 0
• Infill density: 10%
• Infill type" Gyroid

Everything else was left at defaults

I am not sure if the project file will work on other slicers. I have only tested the file in Bambu Studio and printed it on my P1S with the AMS.