• Four Switch Woodie ONLY Four Switch Woodie ONLY Four Switch Woodie ONLY *

Modded my Atari 2600 four switch woodie with this Composite Video Mod Upgrade Kit:
https://vintagegamingandmore.com/product/atari-video-mod-kit/

RECOGNIZE:
I recognize that this .stl is going to upset a lot of people. "Why don't you just_," "You could have just___" or "This is not how I'd do it!" For this, I profusely apologize for your inconvenience.

PREPARE:
I noticed that some people have a tendency to have the holes for the RCA jacks all crooked and messed up. This is not good for resale value (nor OCD). So, I created this jig to drill the RCA jack holes straight on the back of my Atari system for an AV mod project. I have no clue if this jig works on other console models.

MARK IT & DRILL:
Simply hold the jig in place (as the photos show) and use a fine-point sharpie in each of the holes with to mark a simple dot. Remove the jig. You are now ready to drill a 1/8" pilot hole on each dot. Follow through with a 1/4" bit. Voilà! Three perfectly centered holes for the RCA jacks!

NOTE: you'll see washers on the RCA jacks in this photo. This is NOT necessary but I did it to make it more solid against the plastic.

DISCLAIMER:
Unfortunately, since we live in a litigious society that prescribes warning labels on shampoo bottles, use of plastic bags and bubblegum, I am TOTALLY EXEMPT from liability if you drill through your fingers, destroy or use it on a different system. I also think I'm funny.

Creality

Ender 3

No

No

.3

5%