Overview：

I disassembled the trolley from an old oven and installed reinforcing ribs and a layer of melamine board in the middle. In this way, we could easily place the small pizza oven firmly on the trolley. However, the good times didn't last long - one day, when I was pushing the trolley out of the garage, I accidentally hit a bumpy road, and the pizza oven slipped off the trolley, smashing the stone shell of the oven.

For this reason, I specially designed a set of brackets that can be fitted on the legs at the bottom of the oven and firmly fixed the oven to the trailer with screws. Since the legs of the oven are at a certain angle, this set of brackets can firmly anchor the oven to the trailer. The effect of use is very ideal, and I don't have to worry about breaking the stone shell of the oven again.

Print：

Considering that this trailer is mainly placed indoors, I chose PLA for printing. If it is used outdoors, I would recommend using ASA material instead. In addition, there is no need to add support structures for this project.