There are only the original STL files in the dark version

This is for a brighter version

Print with a 100% infill rate, a layer height of 0.08 mm, and a base layer of 0.16 mm

Consumables used: JAYO black, transmission distance: 0.3; JAYO white, transmission distance: 21

Switching instructions: Start with black, and switch to white on the third layer

This is for a darker version

Print with a 100% infill rate, a layer height of 0.08 mm, and a base layer of 0.16 mm

Consumables used: Black transmission distance: 0.3 White transmission distance: 6

Switching instructions: Start with black, and switch to white at the seventh layer