🛡 SpearShield USB Holder

A small Spartan figure that holds a USB drive in the shield.
The USB slides in and stays in place with pressure.
One solid piece, easy to print.

🖨 Basic Print Settings

• 🔧 Nozzle: 0.4 mm or (0.2 mm Recommended for detail)

• 📏 Layer height: 0.2 mm

• 🧱 Infill: 15%

• 🧵 Walls: 2-3

• 🚫 Supports: Yes

• 🧪 Material: PLA

Simple, clean, and ready to print.