Model Description

While researching a laptop stand for my wife, who needed to use her work laptop with a larger monitor at her desk, I came across an original design that seemed promising. However, after attempting to print the parts, I encountered several issues, particularly with tolerances and print quality, especially for the tubes. I had to reprint several components and ultimately decided to redraw the tubes as square shapes with chamfers to address these problems.

I attribute the initial issues to operator error on my part, but I also found that the basic tubes were too short, and the extended ones, when glued together, didn't have the aesthetic I was aiming for.

To improve the design, I incorporated an idea suggested by @ChopcatSuey_803149 to use M8 30mm round dome hex bolts, as I encountered similar tolerance and printing issues with the original printed bolts.

Using Fusion 360, I completely redrew the design, excluding the printed screws. If you're interested in those, @ChopcatSuey_803149 has a remixed version available here: Easier to Print Bolt Design for the AdjustoStand.

Available Files

To cater to various needs and preferences, I have provided the following file types:

• Fusion 360 (.F3D)
• 3MF
• STEP
• .STL

Feel free to customise and modify the design to suit your specific requirements.

Community Collaboration

I encourage you to share your customised versions on the community sharing page. By collaborating, we can learn from each other and enhance the design further. If you encounter any issues or if the design does not meet your expectations, please let me know on the sharing page. I will do my best to address any concerns.

Please like, save, and share the design if you find it useful. Your feedback, both positive and constructive, is invaluable in helping me improve these creations. I’d also love to see photos of your prints! I’m curious to see how they turn out for you.

Print Settings:

• Detail Quality
• Nozzle: 0.2mm
• Walls: 3
• Top/Bottom Layers: 4
• Infill: 15% Cubic
• Supports: No
• Material: Eryone PLA
• Colour: Navy Blue
• Weight: 172 g
• Print Time: 34  hours 0 minutes.

Instructions for Use

1. Download Files: Access the provided files in your preferred format. Also, visit @ChopcatSuey_803149 page referenced in these notes for build instructions.
2. Print: Use the recommended print settings for the best results.
3. Share: Upload your customized versions and photos of your prints on the community sharing page.

Conclusion

Thank you for your interest and feedback! By sharing your experiences and improvements, we can collectively refine and perfect this design. Let’s continue to innovate and create together.