Dragon Hueforge Bookmark
WENULYN
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2025-11-04 22:49:25
1
0
000Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 75.02x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Grey
At layer #20 (1.68mm) swap to White
At layer #23 (1.92mm) swap to Black
At layer #25 (2.08mm) swap to Red for the rest.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY