Hey,

I designed a wall mount for my Nintendo Switch because it is always far away from the docking station and I don't want to leave it lying around. I designed it to be easy to print, but you need 3 screws M4x25 and 3 M4 nuts and of course the screws and plugs to mount it on the wall, I designed three holes in the back plates. You can first screw the back plates to the wall and then screw the front. I made them relatively thick so that they will fit even with handier controllers. You should be able to print everything in horizontal position without support, but I might recommend a brim.

Translated with www.DeepL.com/Translator (free version)

Print Settings

Printer:

Geeetech A10

Rafts:

Supports:

No

Resolution:

Infill:

10%

Filament:

Geeetch PLA,PETG

Black,Red

Category: Video Games