A remix of Tyrden's original. I prefer the thicker walls to the 1mm walls of Patella's remix—I find them more aesthetically pleasing as well as more robust.

I think this is a complete list of the modifications I've made on Tyrden's original:

• No assembly required; I've joined it all up as you'd expect for a 3d print model.
• Added a base to the card boxes (0.6mm for a faster print)
• Opened the back of the card boxes (so you can stash behind, like in Patella's version, but with a base so the print is more stable)
• Reduced the number of card slots in the card boxes to 5 from 12 (I don't feel the need to separate the player cards by colour and it makes it stronger I reckon)
• Removed the perimeter so the card boxes are now separate, and made the trays slightly longer to take up the gained space
• Reduced the base on all of the trays from 1mm to 0.6mm (for a faster print)
• Joined the two top boxes into one (not pictured in my print pictures) and made them a little deeper

I print using PrusaSlicer on a CR10S Pro v2 with a 0.6mm nozzle and I always use Variable layer height with between 0.25 and 0.5 balance between quality and print speed.