A low-poly style aircraft model based on the impression of Zero Fighters.

The propeller and landing gears are spinnable.

Printing tips

• Ordinary settings (0.4mm nozzle & 0.2mm layer height) would be ok.
• Uploaded STLs should be in printing orientations (if not, see 3MF for reference).
• Better apply supports to print “Cockpit” part.
• Print two “LandingGear” parts.

Assembly tips

• If Needed, apply glue to secure fixed parts.
• Rotate “LandingGear” part into its slot (as shown in the image below).