Summary

(2018-09-14)
Update to CounterCompletePrint_new_Interlock_shaft.stl : One of the parts have been slightly lower than the other parts in the Complete print files.
This caused problems in slicing with thin first layer heights.

(2018-07-19)
Updated the hollow shaft. I rounded the edge to make it slide more smoothly

The life counter is a nice little tool. Only one thing bugged me: It is slacking.
I decides to try to improve it. This is my solution for the problem:
I made the hole in the middle of the parts bigger and created a hollow shaft that will give the whole thing a little more stability.

I made 2 Versions of the shaft:
-a ordinary shaft
-a 2 piece interlocking shaft. The idea is to glue them with a little drop to the caps after securing the rubber band. the two parts of the shaft and the rings together work as guide.

Haven't printed it myself yet, I run out of filament mid print :-(

If you find problems please let me know. I am sure we will find a solution.