Needed a new one for a piano stool.
Because of the square thread (RH22x7) i could not find one.
So i made one. Printed it and now the stool height adjustmend works again.

Layer Height:
-0.15mm
Infill Density:
-100%
Infill Pattern:
-ZigZag

Print temp:
-200
Build plate temp:
-60

Print Speed:
-60 mm/s

Supports:
-no
Overhang Angle:
-..

Build plate Adhesion:
-Skirt

Printing time:
1x - 02h 20min

Fillament:
1x - 6.34m /~ 19g

Material cost:
1x - 0.19 euro

Creality

Ender 3

No

No

0.15

100%