Introduction

It's simple and straightforward, but an extremely elegant desktop trash can.

The trash can is directly fixed to the tabletop by nano glue, without any redundant connecting parts, which is stable and elegant.

By using this trash can, you can directly sweep the desktop trash or dust into the trash can.

Thanks to the use of plastic bags for loading, you can put wet garbage into the trash can and dump it quickly.

Some concerns

You don't need to worry about the lack of power of the nano adhesive causing the trash can to fall off.

I'm using DuPont Grid double-sided nano adhesive. According to the test, its adhesive strength is much higher than that of PLA.

That is, when pressing down on the edge of the trash can with force, the printout will break first, rather than the nanoglue failing and coming loose.

Use

1. Print the frame and the pressure plate separately

2. Stick the nano glue to the protruding part of the frame

   

3. Pull the garbage bag deep inside the pressing plate and then take it out

   

4. Put the pressing plate and the garbage bag into the frame

   

Applicable desk top

• Thickness:15mm
• The edge of the table:≥ 8mm
• Nanogel thickness:≤1.5mm