Project: pocahontsbarco.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Smart Recycled Blue Transmission Distance: 2.2
    PLA Smart Recycled Green Transmission Distance: 6.5
    PLA Smart Recycled Red Transmission Distance: 4.4
    PLA Kingroon White Transmission Distance: 5.8
    PLA PolyLite Grey Transmission Distance: 1
    PLA Kingroon Brown Transmission Distance: 2.7
    PLA Smart Recycled Orange Transmission Distance: 5.7
    PLA Smart Recycled Yellow Transmission Distance: 9.3
This print uses 9 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #9 (0.8mm) swap to Green
    At layer #12 (1.04mm) swap to Blue
    At layer #13 (1.12mm) swap to Red
    At layer #16 (1.36mm) swap to White
    At layer #19 (1.6mm) swap to Grey
    At layer #20 (1.68mm) swap to Brown
    At layer #22 (1.84mm) swap to Orange
    At layer #27 (2.24mm) swap to Yellow
    At layer #31 (2.56mm) swap to White for the rest.