The Anavi Thermometer:
https://www.crowdsupply.com/anavi-technology/anavi-thermometer

A low-profile ventilated case for the Anavi Thermometer inspired by
https://www.thingiverse.com/thing:3960933 but tailored for my needs.

I needed a small protective case for remote installation (cellar, attic)
that had more protection than the above case would allow with no display
attached. That gaping hole is just asking for wasps to set up housekeeping.

No provision is made for internal mounting of sensors although there is
an option for the external DS18B20 temperature sensor.

I printed with 100% infill, but there's not much infill.

Brass threaded inserts (M3 short) are used to provide secure closure. I
used M3X6 socket head screws; there is void enough behind the insert to
use up to 10 mm screws.

files included:
antCase-1.scad
antCaseBase.stl
antCaseBaseTabs.stl
antCaseTop.stl
antCaseTopDS.stl
antCaseTopDSTabs.stl
antCaseTopTabs.stl

In antCase-1.scad:
The variable 'withTabs' can be set true or false.
true: produces two mounting tabs on diagonal corners
false: no mounting tabs
The variable 'withDS' can be set true or false.
true: access to the 3 screw terminals for mounting DS18B20
false: no access to the 3 screw terminals

Anycubic

i3 Mega S/Pro

Doesn't Matter

Doesn't Matter

0.2

100%