Multicolor pin with "Everlasting summer" logo.

You can print this on single-extruder printer.

How to print this:

1) Upload, select and merge all files in Cura. (make sure that you orient the models correctly)
2) Press "ungroup" and delete all but the first part.
(i recommend to print in this order: leaf, bug, veins, contour and main body)
3) Slice one model at a time with recommended settings and save.
4) When you finish first part press Ctrl + Z and repeat slicing for others.
5) After you printed first part, change the filament and print next one.
6) For the main body you have 2 options: if you have a 3d pen, you can use it to attach a metal pin, to do this, print the model without brace. Otherwise, pause the print at the right moment and attach a metal pin (I did it with a lighter)

Anycubic

Kossel

No

No

I used 0.1 mm layer height and 30 mm/s speed for the colored part and 0.2 mm, 60 mm/s for main body.
Also you have to turn on Z-hop feature in slicer, i recommend 0.8 mm.
If you will be using a skirt, make sure it does not interfere with the printed parts of the model or just remove it immediately. (do NOT use rafts or brim)