This is a remix of the Lid from the spanner hands spool system. I got sick of opening the spool holder so it was either build in a window or print from transparent filament. I did both (the one with the window will be uploaded in a few days). This includes the files for the LED threaded mounts if you use 12v LEDs like I did you can wire directly into your printers power supply, be sure to wire in parallel or they won't be very bright. I will say the "clear" one is easier to see through but not nearly as cool looking as the transparent Red (pictured above) or the transparent black. Be sure to read the print instructions for some tips to make your transparent as clear as possible.

If you are curious what printer it is mounted to that is GOLIATH (so named for the nearly 1 meter print height). I will be uploading the prints and specs on it this holiday weekend.

GOLIATH

No

No

.2

50%

Print HOT like 220c and with 110% flow maybe even 115% practice on a smaller object to get the ideal settings dialed in (try a lid or 1 mm thick sheet 1 cm x 1 cm to figure it all out.

Be sure to wire the lights in parallel or the resulting voltage drop can cause the fan to slow down and the LEDs to not light. If you have questions feel free to ask.