This is a double-height bracket for mounting other Saitek/Logitech panels, flight instrument panels (FIP) or my tablet holder (see my designs) at a 40° angle.

You'll need 4 x 8mm M4 to fix it.
There are two versions:

• With 5mm holes on the right for M4 inserts;
• With 4mm holes on the right if you don't have an insert.

The dimensions are identical (I've mounted it on original Saitek brackets). But if you have a small difference (due to significant shrinkage, for example), I recommend re-drilling the left-hand holes with a 4.5mm or 5mm drill bit.

To be printed in PETG or ABS, but definitely not PLA!
Nozzle size 0.4, layer thickness 0.2, infill 25%, normal support only on buildplate.