Wheelchair Cup Holder

My mother-in-law has a difficult time getting around in her wheelchair and taking her sippy cup with her at the same time. This cup holder solves the problem.

Please print with a stable wall thickness (2mm), as collisions with tables or similar can occur.

For assembly, you will need a 15 mm aluminum tube and three M5 screws plus nuts.

Portavasos para silla de ruedas
Becherhalter für Rollstuhl

T2 Delta 3D

No

No

100 %

no

Don't feel like drilling and sawing?
I used a sturdy aluminum tube. This has to be drilled and sawn to the right length. If you want to try to print the rod in 3D, I have constructed "no_desire_to_drill_X_experimental.stl". The length of "no_desire_to_drill_4_experimental.stl" can simply be scaled using the x value in the slicer. In Cura, the lock should be opened so that x, y and z are not scaled proportionally. I don't know whether it is stable...