Designed this wall mount for the Boring Company not a Flamethrower.

Full print with 2x2x2 walls/top/bottom
25% infil with 100% infil around the screw mounts and edges of device hooks
8mm brim
17 hour print time
Supports on for washer recess and screw holes

Used washers (M5x20x1.2mm) and dry wall flip toggles to mount to wall. I needed to file down the recesses for the washer for a perfect fit due to stubborn support material.

Ultimaker

Ultimaker 2

No

Yes

200

25% & 100%