Project: Joker.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (1.28mm) swap to Lavender Purple
At layer #14 (1.76mm) swap to BambuLab Green
At layer #18 (2.24mm) swap to Jade White for the rest.