Over-Engineered spool holder for a wall. Accepts various diameter spools. Complete with ‘spring loaded’ pegs so you can remove easily. 

55.5mm is the diameter what Creality spool is, Depree is 72mm. If you have a digi-caliper, you'll be able to accurately measure the external part to the spool core / draw it on paper and measure!

Spool Splitter: Fits the smallest core spool only.

Spring only really required if you're intending on hanging upside down (see gif video). Possibly not required if fixing at 90 degrees onto a wall. Holds approx 3kg, spring dependent.

Print Settings

PLA* 3 walls min, 10 - 20% infill. Print flat so the only supports required are for the screw holes. 

* Unsure if this will work with PETG / ABS etc…I guess it would, but would be a little more rigid.