This is my version 2 of my bumper intake design, main changes include shortening the bottom tube so it wont have as high of a chance of hydro locking the engine and the couplers that were used on v1 were removed, favoring a slide in design that makes a seamless connection. The intake will need to be glued together using acetone. 

I also utilized the Dinan replacement air filter linked below, as its more compact and cheaper than the original. a hose clamp will need to be bought for the air filter 

Printed In black ABS 

I glued the tubes together with acetone.

USE ABS, AN EQUIVALENT OR A HIGHER HEAT TOLORANCE FILAMENT, DO NOT USE PLA 

Dinan Air Filter: https://www.fcpeuro.com/products/bmw-replacement-air-filter-for-cold-air-intake-e36-e39-d403-0350?ads_cmpid=21618800545&ads_adid=166814099416&ads_matchtype=&ads_network=g&ads_creative=710407235418&utm_term=&ads_targetid=pla-297546631617&utm_campaign=&utm_source=adwords&utm_medium=ppc&ttv=2&gad_source=1&gad_campaignid=21618800545&gbraid=0AAAAAD3np3VmatB6U_9AIbnGS_IgY-wJt&gclid=Cj0KCQjw77bPBhC_ARIsAGAjjV8bIrmd9lwPRhZ9dwq6NcEpyFV_kV29SVHKG2tJlgzgD7-PoFy1Qo4aAjqLEALw_wcB

Silicone Tube (will need trimming): https://www.amazon.com/Ucreative-Thickness-Performance-Silicone-Coupler/dp/B093SRQZLF/ref=pd_bxgy_thbs_d_sccl_1/132-9282714-1149548?pd_rd_w=XDEnS&content-id=amzn1.sym.3858a394-39a9-4946-90e6-86a3153d2546&pf_rd_p=3858a394-39a9-4946-90e6-86a3153d2546&pf_rd_r=52G4T7M7TX8YG9RGSJ2G&pd_rd_wg=OPrBv&pd_rd_r=21f86e3d-a2bd-4f83-b346-8976b436ddaf&pd_rd_i=B093SRQZLF&th=1

Printer: creality k1 

(the one pictured that is held is the final prototype)

Removal of the brake duck, trimming the fender liner and removal of one the horns is required to install. I am not responsible for any damages you do to your car