Example Slicer Settings:

Printer Type: FDM (Filament printer)
Material: 1.75mm PLA

Layer Height: 0.1 - 0.2mm (Smaller layer height will result in high fidelity
prints but longer print time)
Shells: 2.5
Extrusion Width: 0.4mm

Bottom Solid Fill Layers: 4
Top Solid Fill Layers: 6

Infill Density: 10%
Infill Overlap: 30%
Infill Flow Rate: 100%

Supports: Off
Platform additions: Off

Heated Bed Temperature: 55°C
Extruder Temperature: 205°C
Cooling Fans: Enabled

Default Printing Speed: 60mm/s
Inner Shell Speed: 45mm/s
Outer Shell Speed: 35mm/s
First Layer Speed: 15mm/s
Infill Speed: 70mm/s