These end-caps are made for 120x25mm LINK fans - compatible with:

• RX120 & RX120 RGB
• QX120
• LX120 & LX120-R

The blank plate does not need mirroring, but the end-cap w. space for cable can be mirrored so it fits on each end of the fan. We have not used magnets in these since the magnets in the fans are directional, so that would mean the blank plate would not be able to be mounted on both ends. The prints can however be modified to fit 6x2mm magnets which gives an even sturdier connection to the fans.

Print settings:

Printed at .15mm layer height (which gives two layers above the washers) in PLA

You will want to pause the prints and insert metal washers so they can be held in place with the magnets that are in the fans. The files are made for 10x1mm washers, but you can modify the parts for different sizes.

In the picture above you can see the internal cutouts for the washers. If you do not wish to use these you can always use double sided tape.