Model Rocket Sem I

Model Rocket Totally Printed!!!
Work whit normal Estes or 18mm Rocket Motor! I recommend using D category engines. Very interesting to understand the physical phenomena, 3d printing but above all have fun!!!
To assemble the rocket, we just have to use a strong glue!

To mount this rocket you need:

• 3D Printed parts
  Guide (x2)
  Ogiva (x1)
  Fusoliera (x3)
  Raccordo (x2)
  Coda (x1)
• Strong glue (two component)
• Sand paper

Grind all the pieces!

Paste one "Raccordo" into one "Fusoliera" (repeat the action with one more "Raccordo" and "Fusoliera"). When the glue has dried, uniting the two parts with one "Fusoliera" to have a long fuselage. Glue the fuselage with one "Coda". Insert the "Ogiva" into the fuselage. Paste the parachute (of plastic, with 17" of diameter) to the fuselage.

Now The Rocket Is Ready To Fly!
Enjoy!

This project is for the kid from 7 years old to 18 years old! Under the supervision of an adult, in an open place. Normal Estes motor D can make high fly! To launch the rocket is need a model rocket launch controller! You can find it on my profile, at this link:

http://www.thingiverse.com/thing:1607954

Suitable for outdoor exercise classes! Easy to use and funny! To learn about the laws of physics, rocket motor and so on!