A colander (“pasta sieve”) with 360 holes and two handles, printable without support structures.

It’s meant to be used only as a toy. I don’t recommend using it for actual food for hygiene reasons (seehttps://help.prusa3d.com/article/food-safe-FDM-printing_112313(on that topic).

Print in PETG for outdoor applications.

The diameter is 180 mm, so it will fit perfectly in the Prusa MINI.

The model is designed to be printed without supports (max. overhang angle 60°).
My MINI encountered some issues with that when attempting to print at a layer height of 0.3 mm, so I highly recommend printing at a layer height of 0.2 mm.