A set of parts for creating a mini greenhouse. The original size of the parts is intended for tubes with a diameter of 16 mm. In the title picture, the length of all the tubes is 500 mm, while the width of the greenhouse is approximately 900 mm and the height is 770 mm. The length of the greenhouse can be selected by changing the length of the tubes and the number of segments. Use the anchors from the kit to install the greenhouse on the ground.

Added greenhouse parts made of composite reinforcement with a diameter of 10 mm with pre-prepared ends so that the diameter was approximately 7 mm and 30 mm long. To do this, you need to cut the outer coil of the reinforcement on the emery (a sample can be seen in the picture). Or use smooth rods with a diameter of 7 mm.