As always, I'm open to suggestions.  Feel free to drop requests in the comments!  And, if you would like to support my work, please visit my Ko-fi!  - RAF

= Future Changes =

• Will add things as I come up with them -- or get suggestions.

= Change Log =

null

= Printing Suggesstions =

• 4 Walls / 20-30% Cubic Infill / No Supports

• Tested in PLA and PETG

= Neutrik Replacement =

This model fits in the hole for the Neutrik NA-USB.  As Neutrik seem to be getting more expensive, this is a way to save some money -- if you don't mind a semi-permanent cable.  Simply put the cable in between the two halves, insert it into the hole, and screw it down. I only tested it with a few cables, and the cable clamped pretty well.  If you find it doesn't work for your cable, let me know and I can make some adjustments.

= Cable Tie-Off =

I made this to prevent the cable from getting pulled out of the Neutrik.  But it also works as a way to stow the cable.  The slot in the back will accommodate a pretty thick piece of Velcro, or a cable-tie.  The space in the front helps clamp down the cable when you tighten it.  Will require swapping the existing bolts out for M6x50mm bolts.

= More to Come! =

I have some other ideas I haven't tried yet.  Please let me know if you have any requests!

RAF