AUW with 1000mah 3S = 286.5g
AUW less lipo = 204g
3D printed frame 65g
-RCX 1804 2400kv motors
-10a simon k ESCs
-Power distro board and xt60 connector
-KK2 fc
-5030 gemfan props
-Lemon RX

Printed in PLA
infill 15%
shells 2
layer height .2mm

The fc plate and top plate are press fit, tight.
The 2 halves are held together by zip ties then the plates provide the strength.