Summary

Hi Guys,

I made a small update of the Filament Guide, so that it can be used with the Trianglelabs BMG extruder. You can find the modified version at

https://www.thingiverse.com/thing:4391699

Hi Guys,

This is my take on a spoolholder that was originally made for the Anycubic I3 Mega. I modified it and made two versions of it. The first is with the spoolholder in the original position and the second is with the spool holder to the side (90 ° turn).

I also made a second versions of the roller. The original only had one larger edge, my second version has two of these edges. In order to make it easier to print the second version of the roller, I divided it in two. I made this second version because with the original the spool sometimes runs of the roller. To connect the two halves of the roller, you have to print an extra axis, so 3 in total.

All you need is some M3 bolts and nuts and two Ball bearing 608ZZ. In order to mount the spool holder on the side you have to drill a small hole in the original mounting bracket.

If you download it, please leave a comment. It's always nice to know that others like it too. This is my second upload, so feedback is always welcome