Abstract

A space-saving and convenient automatic watering pot.

External dimensions: 120x120x150mm / (4.7x4.7x5.9'').
And
External dimensions: 120x120x100mm (4.7x4.7x3.9'').

If it is possible to reduce the size, it is also feasible, because the wall thickness of the upper part is 2mm, and the wall thickness of the lower part is 2.5mm.
Just make sure there are at least two enclosing lines.

Some suggestions:

1. If you are going to use it in a place close to direct sunlight, please do not use PLA material;
2. In order to increase waterproofing, you can use the "random" or aligned seam alignment method, and set the flow rate between 101-104%;
3. The printing direction is the same as that in the images and STL files. The Z axis is facing upwards.

If you need the Fusion source file, please leave a message for me. There are still some issues at the moment. I don't plan to optimize it unless someone needs it. Alternatively, you can stay on my profile page for a few days and wait for a configurable F360 version.

I've attached the Step file. The STL file is not good.

Welcome to leave your comments. Any criticism is welcome. If you need to create or render something similar, please contact us atUpworkYou can find me on WeChat.