This is my first design work after returning to the design field after a three-year hiatus. In the past, I always created my works without drawing, purely by hand, and there were many limitations in the craftsmanship. The purpose of my return to the design field at this time is to use more design methods to realize various designs that I couldn't perfect in the past.

The transparent paper airplane corresponds to the last video work when I quit the hobby in 2022. I hope the upcoming story will have a beginning and an end!

Detailed video of this work: [Self-developed: 3D-printed remote-controlled transparent paper airplane]

At present, we have made two versions of the adaptation list, which is as follows:

：

Integrated 5A brushed double linear servo motor receiver board x1

1 x 8520 hollow-cup motor

1 x 60-65mm propeller

1. A 3.7V, 50-150mAh lithium battery

1 remote control device with three or more channels

0.5-1.0mm carbon rod x1

0.5–0.8mm steel wire x1

1 piece of 2mm heat-shrinkable tubing

：

2.7 gram rocker servo motors

1 x 8520 hollow-cup motor

1 x 5A brushless ESC

1 x 60-65mm propeller

・One 3.7V or 3.85V high-voltage 100-300mAh lithium battery

Remote control and receiving devices with three or more channels x1

0.5-1.0mm carbon rod x1

0.5–0.8mm steel wire x1

1 piece of 2mm heat-shrinkable tubing

In the future, when I have time, I will also create more compatible versions based on the feedback from players.

Schematic diagram of the reinforcing points of the carbon rod: