I make no promises or guarantees, use at own risk and try not to break any of the plastic pieces of the assembly or center console while removing or reinstalling.

Made to fit my 2002 ZX5 Ford Focus, will also fit my 2010 ZX2 Ford Focus.  I'm not sure what model years use this gearshift assembly.

Printed it at 100% infill from 95A TPU with overhangs made printable.

Bushing is a tight fit, you have to take the arm rest and center console out to get to the shifter assembly.

Need philips 3 drive and a 10mm socket.

If the centering spring slips under the assembly as pictured like it did for me you'll need to take off the four 10mm nuts holding the assembly in place and reseat the return spring.

If the top of the assembly does not want to sit flush check the splt bushing underneath it as it has little guide wings that have to be seated

A little stiff to insert, I used my screw driver without a bit to get it through.

Took me about an hour to take apart, install and get the console back in place.