IKEA Skadi shelf bracket

These brackets can be hung on the walls of the IKEA SKADI series.The upper edge。The bracket canFree movementAndAdjustable width。Another advantage is that each shelf can be usedMany bracketsthereby achievingextremely high stability。I used the leftover parts of the drawer panels to make the shelf, which is 35 centimeters long, 8 centimeters wide, and 1 centimeter thick. However, you can use and install anything as a shelf.

The two holes in the bracket are for6.5 mm through-holeIt is used for wood screws.

It is not recommended to scale it down, because otherwise, the spacing of the brackets will no longer be suitable for the thickness of the board.

As long as they are not used outdoors, these brackets can be easily printed using PLA.

Have a nice printing experience