Project: ACDC.hfp

Print with a layer height of 0.08 mm and a base height of 0.16 mm, and a 100% fill rate

The model's dimensions are 133.63x200mm.

It is possible to print at a higher floor height below a minimum depth of 0.48mm

The maximum depth is 4mm, and the actual depth is 2.7mm.

Consumables used:

Black PLA, transmission distance: 0

Blue-grey PLA B Basic, transmission distance: 3

Red PLA, transmission distance: 3.5

Yellow PLA Basic, transmission distance: 6

White PLA, transmission distance: 3.5

This printer uses five unique consumables

Replacement instructions:

Start with black

At the 12th layer (1.04mm), switch to blue-grey

At the 15th layer (1.28mm), switch to red

At the 19th layer (1.6mm), switch to yellow

At the 28th layer (2.32mm), switch to white until the printing is finished