Project: momo.hfp
Print with a layer height of 0.08 mm and a base layer height of 0.16 mm, and a 100% fill rate

The model size is 102x170mm.
You can use a higher layer height for printing at a minimum depth of 0.48mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
PLA PolyTerra military blue. Transmission distance: 0.3
PLA BambuLab Basic, red. Transmission distance: 5 meters.
PLA BambuLab Basic, Orange. Transmission distance: 5 meters.
PLA BambuLab Matte Light Purple. Transmission distance: 2
PLA BambuLab Basic, beige color, transmission distance: 8
PLA BambuLab Basic, jade white. Transmission distance: 5 meters.
This printer uses six unique consumables

Replacement instructions:
Starting with the military blue
Switch to red at the 8th layer
Switch to orange at the 10th layer
Switch to light purple-violet at the 16th layer
Switch to the beige color at the 19th layer
Switch to jade white at the 24th layer