For the Xiaopeng P5 armrest storage box, since there are folded edges at the opening, in order to achieve one-piece printing and reduce the amount of support structures, I designed a support sacrifice. After printing, it can be easily removed, leaving marks on the side walls, but this does not affect the overall appearance because it is not visible during use.

The lower part of the mouth flap is used for support and will be removed after printing is completed.

Please set the bridge reverse to 45°, otherwise there will be a completely suspended layer, which will affect the printing effect.

To support the effect after the demolition, you can just scrape it with a knife to remove the residual marks.