Hello 3D printing enthusiasts! 😃
"Here you can print a beautiful butterfly picture!"

Filament Recommendation:

Use SILK WHITE for the white to give the image a noble shine.

Printing Settings:

• Infill: 100% for maximum stability
• Layer Height: 0.08 mm for fine details
• First Layer: 0.16 mm for a solid base

Filaments Used:

• PLA BambuLab Basic Black
  Transmission Distance: 0.6
• PLA BambuLab Basic Pink
  Transmission Distance: 8
• PLA BambuLab Basic Beige
  Transmission Distance: 8
• PLA BambuLab Basic Jade White
  Transmission Distance: 5

Filament Change Instructions:

1. Start with Black
2. Change to Pink at Layer 9 (0.8 mm)
3. Change to Beige at Layer 14 (1.2 mm)
4. Change to Jade White at Layer 20 (1.68 mm) and print the rest in this color.

Have fun printing! 🦋