Bionic frog - hueforge 3d effect - 2 colours 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 1.68mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #ffffff PLA sunlu white  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Sunlu Matte Black
    At layer #12 (1.04mm) swap to sunlu white for the rest.